 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Features 32dBm (Typ) Saturated Output Power 32dB (Typ) Linear Gain ESD Protection On Die Unconditionally Stable Low Cost, Surfae Mount Package 4x4x1.4 mm RoHS Compliant 7V, 770mA Applications Ku-Band VSAT Transmit Subsystems General Description The CMQ1432-QH is a pHEMT power amplifier packaged in a 4X4 QFN plastic package. The CMQ1631-QH is self contained with 50 ohm input and output terminals. The PAM is unconditionally stable and the internal matching allows for a reduction in external components making this product a simple and low cost solution. RoHS compliance and on-chip ESD protection make it an ideal solution in all manufacturing environments. The power amplifier is intended for use as the final RF amplifier in the extended Ku-Band satellite applications. Absolute Maximum Ratings Drain Voltage (+Vdd) Gate Voltage (Vgg) Quiescent Current (Idq) Gate Current (Ig) RF Input Power (Pin) Dissipated Power (Piss) Storage Temperature Operating Backside Temperature +8 V -3 V 1000 mA 5 mA +11 dBm 8W -50 C to +150 C -40 C to +80 C Electrical Characteristics (T = +25C,Vd = 7V, Id = 770mA) Parameter Operating Frequency (F) Drain Current (At Saturation) (Id) Drain Voltage (Vd) Gate Voltage (RF ON) (Vg) Linear Gain (S21) Input Reflection Coefficient (S11) Output Reflection Coefficient (S22) Noise Figure (NF) Saturated Output Power (Psat) Power @ 1dB Compression Gain (P1dB) Power Added Efficiency (At Saturation) (PAE) Gate Current (Igs) Units GHz mA Volts Volts dB dB dB dB dBm dBm % mA Min. 13.5 6 -2 Typ. 770 7 33 -11 -8 9 32 29 27 0.5 Max. 15.5 7.5 -0.2 - 5 Electrical Specifications (TA = -25C to 80C) Operation outside these limits can cause permanent damage. Parameter Condition Saturated Output Power Variation from room temperature Linear Gain Variation from room temperature Stability Units dB dB Min Typ Max -0.7 2.5 -2.5 Unconditional Stable Page 1 of 7 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Typical Performance Small Signal Performance 7V, 770mA 35 30 25 20 15 30 25 20 15 10 5 0 -5 -10 -15 -20 8 9 10 11 12 13 14 15 16 17 18 19 20 Psat Idq = 770mA, Pin = 8dBm 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 13 13.5 14 14.5 15 15.5 16 Psat_6V Psat_7V S11, S22 (dB) 10 5 0 -5 -10 -15 S21 S11 S22 Pout (dBm) S21 (dB) Frequency (GHz) Frequency (GHz) P1dB Idq = 770mA 34 32 30 28 26 36 34 32 30 28 26 24 22 20 18 16 14 12 10 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 13 13.5 14 Gain Idq = 770mA, Pin = -18dBm Pout (dBm) 24 22 20 18 16 14 12 10 12.5 P1dB_6V P1dB_7V Gain (dB) Gain_6V Gain_7V 14.5 15 15.5 16 Frequency (GHz) Frequency (GHz) Effeciency Idq = 770mA, Pin = 8dBm 50 45 40 35 1000 900 800 700 600 Psat_6V Psat_7V Gate Current @ 14.5GHz Idq = 770mA Effeciency (%) 30 Ig (uA) 25 20 15 10 5 0 13 13.5 14 14.5 15 15.5 16 500 400 300 200 100 0 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V Frequency (GHz) Pin (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Typical Performance Drain Current @ 14.5GHz Idq = 770mA 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 34 32 30 28 26 Iq = 400mA 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Pout, 5V, Iq = 400mA Pout, 6V, Iq = 400mA Pout, 7V, Iq = 400mA Id, 5V, Iq = 400mA Id, 6V, Iq = 400mA Id, 7V, Iq = 400mA Pout (dBm) 24 22 20 18 16 14 12 10 Id (mA) Psat_6V Psat_7V Pin (dBm) Pin (dBm) Iq = 500mA 34 32 30 28 26 1100 Pout, 5V, Iq = 500mA Pout, 6V, Iq = 500mA Pout, 7V, Iq = 500mA Id, 5V, Iq = 500mA Id, 6V, Iq = 500mA Id, 7V, Iq = 500mA NF 1500 Idq = 770mA 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 13 13.5 14 14.5 15 15.5 16 1300 Pout (dBm) 24 Id (mA) Id (mA) Id (mA) 22 20 18 16 14 12 10 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 900 NF_6V NF_7V 700 500 300 Pin (dBm) Pin (dBm) Pout Vs Pin @ 13GHz Idq = 770mA 34 32 30 28 26 34 32 30 28 26 Pout Vs Pin @ 13.7GHz Idq = 770mA Pout (dBm) 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V Pout (dBm) 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V Pin (dBm) Pin (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Typical Performance Pout Vs Pin @ 14GHz Idq = 770mA 34 32 30 28 26 34 32 30 28 26 Pout Vs Pin @ 14.5GHz Idq = 770mA Pout (dBm) Pout (dBm) 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V Pin (dBm) Pin (dBm) Pout Vs Pin @ 15.5GHz Idq = 770mA 34 32 30 28 26 34 32 30 28 26 Pout Vs Pin @ 16GHz Idq = 770mA Pout (dBm) Pout (dBm) 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V 24 22 20 18 16 14 12 10 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 6 8 10 Psat_6V Psat_7V Pin (dBm) Pin (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Recommended Application Circuit Schematic Biasing notes: 1. Dual bias is required. 2. 1000pf bypass capacitors are needed on PC board as close as possible to device as shown in the schematic. 3. No DC block is required at RF IN/OUT 4. Negative (-) bias must be applied to Vgg before applying positive (+) bias to Vdd. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Physical Dimensions Ordering Information Part Number for Ordering CMQ1432-QH-0G00 CMQ1432-QH-0G0T PB-CMQ1631-QH-0000 Description Matte Tin plated RoHS compliant QFN4X4 24L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN4X4 24L Surface mount package in tape and reel CMQ1431-QH Evaluation Board We also offer this part with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13.5-15.5 GHz 1.5W QFN Plastic Packaged Power Amplifier May 2006 - Rev 23-May-06 CMQ1432-QH Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter "G" will be used in the part number for Matte Tin finished RoHSCompliant components and "L" will be used in the part number of NiPdAu finished RoHS Compliant components in the second position of the part number suffix, as shown below: Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts For those customers not making the change at this time, Mimix/Celeritek will maintain production of current configurations. For questions and comments e-mail: ourearth@mimixbroadband.com. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 7 Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. |
Price & Availability of CMQ1432-QH-0G00
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |